Category: My Blog

Finding The Perfect Bathroom Remodeling Contractor By Following These Methods

Finding The Perfect Bathroom Remodeling Contractor By Following These Methods

Reliable bathroom design and remodeling contractors are found; they do not roam around looking for someone to work with them. You will need to do a little of planning and some work to determine exactly what you’re looking for. You’ll never know if the contractors you are considering are the very best for your job if you do not have a clear picture of what you want. So start by creating a checklist of things you’ll need, and read our list for some strategies and tricks.

It is extremely essential to have a look at your bathroom design and remodeling contractor as part of your team after you enter into an agreement. Examined each and every part of the assention carefully, and make certain to make request about anything you do not totally grasp before denoting the report. Payment of the initial amount should be less that the whole amount. So you can decide how his business is sorted out and how well it’s overseen, plan the printed material to be marked in your contractual worker’s office if conceivable.

Dallas Bathroom Designs

Even though you might be suspicious of a very low quote coming in from a local bathroom design and remodeling contractor, it really doesn’t always mean that he’ll do a sub-standard job. Compare the costs of materials for your project against the offered bid. The costs of their labor should also be factored into the price of the job. You shouldn’t go forward with creating a legally binding contract unless these prices line up with the bid.

Communities establish a set of building codes that must be followed when bathroom design and remodeling contractors perform certain tasks. You need to talk to contractors to see the things they learn about the rules in your area. It’s easy to finish a job quickly if contractors know what they are doing and know the rules and regulations. Come up with a few possible scenarios and present them to your contractor to see how he would handle any possible challenges.

An outstanding temporary worker will do their best to convey stunning results. An effective bathroom design and remodeling contractor will remain on time and deliver what they have promised. Guarantee that your contractual worker has enough time to effectively complete their occupation without interference. Before finalizing your arrangement with a licensed contractor, make certain he carries the required liability insurance.

It continues to be possible to find several reliable bathroom design and remodeling contractors by referring to your local telephone book, even though some may consider it to be old-fashioned. You can look over the advertising content and the listings and decide if there are any contractors that stand out as potential candidates. Make sure that the written contract includes all the financial details, including the payment schedule, as is typical of contracts. Your contractors should keep the work area as clean as possible, so be sure to check that they’re following through and point out any messes right away.

Resource: Ace Bathrooms Dallas TX

Resurfacing And Patching Concrete Surfaces

Resurfacing And Patching Concrete Surfaces

Concreting resurfacing  and patching worn and cracked concrete surfaces of your sidewalk or driveway is not as difficult as you may think. If you follow our steps, you can make the repairs yourself and transform the tired, old surface to a smooth better finish!

Tools Required

You will need the following tools to complete the job:

– hammer
– chisel
– trowel
– concrete edger
– drill (including a paddle mixer)
– high pressure washer
– large bucket
– broom
– gloves and safety googles

Materials Required

You will need to purchase some concrete resurfacer  and some form of weather stripping or duct tape.

The Process

1. Clean the surface and make-good any necessary repairs (the concrete resurfacer bag will have full details). Mix the concrete resurfacer. Section off a small work area (no more than 144 sq ft). Make sure any control and expansion joints are properly maintained. Apply the duct tape/weather stripping to make sure the concrete resurfacer doesn’t spill over in the joints.

2. Put plenty of water on the concrete surface. Remove any surplus water. Pour & spread the concrete resurfacer using a long handle squeegee, scrubbing the resurfacer into the surface.

3. 5 minutes later, apply the broom with full brushes across the full work area, to give a professional, slip-resistant finish. If required, use a concrete-edging tool, but do so before the concrete begins to set (within 20 minutes of the pouring of the concrete).

4. If you require a thicker application, use further thin layers of concrete resurfacer. Alternatively, apply a layer with a trowel after the first squeegee application. If undertaking a trowel application, reduce the water in the concrete resurfacer mix to about 2 and three quarter quarts per 40 pounds of resurfacer.

Always check the concrete resurfacer bag for any additional instructions or any changes required in extreme temperature locations.

Steps to Cleaning a Flooded Basement

If your home has a basement and you have recently experienced heavy rains for an extended period, a flooded basement may be inevitable. That can cause a lot of stress as there are tons of things you need to do right away. Before calling a water damage restoration company because of a flooded basement, check out these five simple steps you can take to clean up the water yourself.

Assess the situation

The first thing you need to do before cleaning up a flooded basement is to assess the situation. Look to see how much water has accumulated in the basement and locate the water’s point of entry. Go into the basement and look for areas where the water is getting in through. Also, check for holes and punctures in the walls and windows.

A Flooded Basement

Pump the water out

Once you see how much water is in the basement and you have marked the areas where water is coming in, you can begin pumping the water out. There are several companies that you could hire for this job, with their service fees depending on the amount of water needed to be pumped.

If there is only a small amount of water and you don’t have the cash to pay a professional, you can rent a water pump, or you can take it out bucket by bucket. Just be sure to finish it off with towels or rags to dry the entire area.

Patch up holes and seal the area

Water Damage Restoration Company

After all the water has been pumped out, you are going to need to patch up the places where the water is coming from. There are several waterproofing concoctions that you can apply to form an airtight seal and keep the water out. If the water is coming in from an upper window, you may either board it up or replace it with a new waterproof window.

Check for areas you may have missed

With all of the water out of the flooded basement and the areas the water was intruding repaired, be sure to test it by spraying a water hose or dumping buckets of water around the area. If there is any water still leaking in re-apply the waterproof sealing paste and try again.

Dry the area thoroughly

With everything ready to go regarding waterproofing, you may now clean up any water damaged items you store in the basement. Make sure to remove everything that got exposed to water damage, so you don’t develop a mold problem.

A flooded basement can be a pain to clean up, especially if you don’t have enough cash to hire professionals to do it. But, who says you can’t do it yourself? Follow the steps above and you can have the job done in just a few days.